# \[SOLVED\] Fresh installation from binary, not reachable on port 3000

**URL:** <https://forum.gitea.com/t/solved-fresh-installation-from-binary-not-reachable-on-port-3000/3352>\
**Category:** Install/Maintain/Configure\
**Created:** [June 7, 2021, 6:52pm UTC](https://forum.gitea.com/t/solved-fresh-installation-from-binary-not-reachable-on-port-3000/3352 "2021-06-07T18:52:22Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Torg](https://avatars.discourse-cdn.com/v4/letter/t/ad7895/32.png) [@Torg](https://forum.gitea.com/u/Torg)\
**Post date:** [June 7, 2021, 6:52pm UTC](https://forum.gitea.com/t/solved-fresh-installation-from-binary-not-reachable-on-port-3000/3352/1 "2021-06-07T18:52:22Z")

</div>

Hi, I did a new installation on my server (Ubuntu 20.04) from binary following the instructions.

Port 3000 was opened in UFW, the Gitea service is up and running.

 ![gitea](https://us1.discourse-cdn.com/flex020/uploads/gitea/original/2X/9/99975985b407d611ff0df304448684b19c5478a1.png)

But I still can’t connect to the configuration page. Any hints what could be wrong?

---

<div class="post-metadata">

**Author:** ![Torg](https://avatars.discourse-cdn.com/v4/letter/t/ad7895/32.png) [@Torg](https://forum.gitea.com/u/Torg)\
**Post date:** [June 8, 2021, 7:53am UTC](https://forum.gitea.com/t/solved-fresh-installation-from-binary-not-reachable-on-port-3000/3352/2 "2021-06-08T07:53:25Z")

</div>

Problem solved. It seems that opening the port in UFW alone didn’t suffice, I had to do the following as well:

```auto
sudo iptables -I INPUT -p tcp -m tcp --dport 3000 -j ACCEPT

```