# Mirror Github need to long

**URL:** <https://forum.gitea.com/t/mirror-github-need-to-long/2228>\
**Category:** Install/Maintain/Configure\
**Created:** [June 14, 2020, 8:03pm UTC](https://forum.gitea.com/t/mirror-github-need-to-long/2228 "2020-06-14T20:03:31Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![somera](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.gitea.com/somera/32/641_2.png) [@somera](https://forum.gitea.com/u/somera)\
**Post date:** [June 14, 2020, 8:03pm UTC](https://forum.gitea.com/t/mirror-github-need-to-long/2228/1 "2020-06-14T20:03:31Z")

</div>

Hi,

I try to mirror this [https://github.com/0ad/0ad](https://github.com/0ad/0ad) project with Gitea 1.11.6+1 which is run on Raspberry Pi 4. It’s wirking on the command line. But it need long time.

It’s possible to do this with Gitea too?

Regards,  
Rafal

---

<div class="post-metadata">

**Author:** ![kpfleming](https://avatars.discourse-cdn.com/v4/letter/k/cc9497/32.png) [@kpfleming](https://forum.gitea.com/u/kpfleming)\
**Post date:** [June 14, 2020, 8:20pm UTC](https://forum.gitea.com/t/mirror-github-need-to-long/2228/2 "2020-06-14T20:20:03Z")

</div>

That repository has more than 24,000 commits in it; it will take quite a while to push a mirror of that repo to Gitea running on a fairly slow system like an RPi 4.

---

<div class="post-metadata">

**Author:** ![somera](https://sea2.discourse-cdn.com/flex020/user_avatar/forum.gitea.com/somera/32/641_2.png) [@somera](https://forum.gitea.com/u/somera)\
**Post date:** [June 14, 2020, 8:42pm UTC](https://forum.gitea.com/t/mirror-github-need-to-long/2228/3 "2020-06-14T20:42:03Z")

</div>

On my PC this need 13 minutes …

$ date ; git clone [https://github.com/0ad/0ad.git](https://github.com/0ad/0ad.git) ; date  
**So, 14. Jun 2020 22:39:31**  
Cloning into ‘0ad’…  
remote: Enumerating objects: 812, done.  
remote: Counting objects: 100% (812/812), done.  
remote: Compressing objects: 100% (375/375), done.  
remote: Total 461140 (delta 571), reused 549 (delta 437), pack-reused 460328  
Receiving objects: 100% (461140/461140), 4.38 GiB | 5.59 MiB/s, done.  
Resolving deltas: 100% (355742/355742), done.  
Updating files: 100% (33839/33839), done.  
**So, 14. Jun 2020 22:53:59**

But it’s possible to do this with Gitea?

---

<div class="post-metadata">

**Author:** ![kpfleming](https://avatars.discourse-cdn.com/v4/letter/k/cc9497/32.png) [@kpfleming](https://forum.gitea.com/u/kpfleming)\
**Post date:** [June 15, 2020, 12:20am UTC](https://forum.gitea.com/t/mirror-github-need-to-long/2228/4 "2020-06-15T00:20:08Z")

</div>

Nobody can tell you if it’s possible or not. Your PC likely has a much faster processor, more RAM, and a _much_ faster storage system than the Raspberry Pi does.
